The genius of Bag'in's solution is that the top and bottom parts attach together with a robust zipper. This protects your outdoor furniture from both below and above.

Check our instruction video for how to connect the zipper when top and bottom are assembled (NOTE: Norwegian text):

In Autumn

Place the bottom part (the black part) down on the surface where you'll set up the bag. Make sure both sliders are on the right side of the red marker that's on both the bottom and top part. If one or both sliding parts are on the left side, you need to pull them both around the bag. So you have both sliders on the right side. Then connect the top and bottom parts, take the sliders furthest to the right and pull around the entire bag. Leave the other slider. So you have one slider on the right side and one on the left side of the red marker. Then secure by connecting the carabiner hook on both sliders so no wind can open the bag.

In Spring

The bag has been connected through winter. You have one slider on the left side of the red marker and one on the right side. Remove the carabiner hook that connects both sliders. Take the slider on the left side and pull it around the entire bag so you have both sliders on the right side. Be a bit careful when doing this so the slider doesn't get stuck in the bag. Now you have both sliders on the right side of the red marker. Then gently shake the top and bottom parts and separate them. Then you can remove the top part. Preferably hang it to dry before packing it away. Do the same with the bottom part after removing the outdoor furniture. When doing this, check that everything looks good, that no tears or holes have appeared during winter. If you're unlucky enough to get a tear or hole, we have the solution in our webshop.